Netgear Wnr614 Vulnerabilities & CVEs

Q: Is my Netgear Wnr614 affected by these vulnerabilities?

Only if you’re running a firmware version in the affected range listed above and haven’t updated. Check your router's admin panel for its current firmware version and compare it against the ranges below.

Q: How do I update my Netgear Wnr614's firmware?

Log into the router's web admin panel (usually at its local IP address) and look for a Firmware Update or System Update section, or use the vendor's mobile app if it has one.

Q: Does ProbeShield fix these vulnerabilities for me?

No — ProbeShield scans your network and tells you what it finds (open ports, default credentials, outdated firmware signals) so you know what to fix, and how. It never changes your devices’ settings.

Known CVEs

CVE-2016-10174CRITICAL (9.8)CISA KEV

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achie...

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2019-20690HIGH (8.8)

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.30, D7000 before 1.0.1.66, R6020 before 1.0.0.34, R6080 before 1.0.0.34, R6120 before 1.0.0.44, R6220 before 1.1.0.68, WN...

Affected: versions < 1.1.0.54Fixed in: 1.1.0.54

CVE-2017-18791HIGH (8.8)

Certain NETGEAR devices are affected by CSRF. This affects R6050/JR6150 before 1.0.1.7, PR2000 before 1.0.0.17, R6220 before 1.1.0.50, WNDR3700v5 before 1.1.0.48, JNR1010v2 before 1.1.0.40, JWNR2010v5 before 1.1.0.40,...

Affected: versions < 1.1.0.40Fixed in: 1.1.0.40

CVE-2024-36787HIGH (8.8)

An issue in Netgear WNR614 JNR1010V2 N300-V1.1.0.54_1.0.1 allows attackers to bypass authentication and access the administrative interface via unspecified vectors.

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2024-36790HIGH (8.8)

Netgear WNR614 JNR1010V2/N300-V1.1.0.54_1.0.1 was discovered to store credentials in plaintext.

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2024-36792HIGH (8.2)

An issue in the implementation of the WPS in Netgear WNR614 JNR1010V2/N300-V1.1.0.54_1.0.1 allows attackers to gain access to the router's pin.

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2024-36789HIGH (8.1)

An issue in Netgear WNR614 JNR1010V2/N300-V1.1.0.54_1.0.1 allows attackers to create passwords that do not conform to defined security standards.

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2016-11057HIGH (7.5)

Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 201...

Affected: versions < 2017-01-06Fixed in: 2017-01-06

CVE-2025-5495HIGH (7.3)

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads ...

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

CVE-2024-36788MEDIUM (4.8)

Netgear WNR614 JNR1010V2 N300-V1.1.0.54_1.0.1 does not properly set the HTTPOnly flag for cookies. This allows attackers to possibly intercept and access sensitive communications between the router and connected devices.

Affected: Not version-specific per NVD — check the advisoryFixed in: See vendor advisory

Commonly exposed ports

Port 23 (Telnet) — Sends admin credentials unencrypted — a common target on older router firmware.
Port 80 (HTTP admin panel) — The web admin UI; dangerous if remote/WAN administration is left enabled.
Port 7547 (TR-069 (CWMP)) — ISP remote-management protocol — has been the entry point for several router botnets.
Port 1900 (UPnP/SSDP) — Lets apps on your LAN open firewall holes automatically, sometimes without your knowledge.

Default credentials

From ProbeShield's own tested default-credential list (see probeshield.com/default-passwords/): "netgear" / "password" or "admin" / "netgear1" or "admin" / "password123" over HTTP.

Hardening checklist

Disable remote (WAN-side) administration unless you specifically need it.
Turn off UPnP unless a specific app you trust requires it.
Turn off WPS — it can let an attacker bypass your Wi-Fi password.
Change the default admin username and password to something unique.
Check for a firmware update in the router’s admin panel and apply it.
Disable Telnet/SSH management access if you don’t actively use it.

Frequently asked questions

Is my Netgear Wnr614 affected by these vulnerabilities? Only if you’re running a firmware version in the affected range listed above and haven’t updated. Check your router's admin panel for its current firmware version and compare it against the ranges below.

How do I update my Netgear Wnr614's firmware? Log into the router's web admin panel (usually at its local IP address) and look for a Firmware Update or System Update section, or use the vendor's mobile app if it has one.

Does ProbeShield fix these vulnerabilities for me? No — ProbeShield scans your network and tells you what it finds (open ports, default credentials, outdated firmware signals) so you know what to fix, and how. It never changes your devices’ settings.

Sources: National Vulnerability Database (NVD), CISA Known Exploited Vulnerabilities Catalog. This page lists which firmware versions are affected — it doesn't claim your specific unit is vulnerable. Check your device's current firmware version in its admin panel and compare it against the ranges above.