Netgear Wndap660 Vulnerabilities
8 known CVEs, 2 critical, 1 in CISA's Known Exploited Vulnerabilities catalog. Last updated 2026-10-24.
Known CVEs
(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5...
Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before...
Certain NETGEAR devices are affected by CSRF. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 befo...
Certain NETGEAR devices are affected by CSRF. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 befo...
Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4,...
Certain NETGEAR devices are affected by command execution via a PHP form. This affects WN604 3.3.3 and earlier, WNAP210v2 3.5.20.0 and earlier, WNAP320 3.5.20.0 and earlier, WNDAP350 3.5.20.0 and earlier, WNDAP360 3.5...
Certain NETGEAR devices are affected by command injection. This affects WAC510 before 1.3.0.10, WAC120 before 2.1.4, WNDAP620 before 2.1.3, WND930 before 2.1.2, WN604 before 3.3.7, WNDAP660 before 3.7.4.0, WNDAP350 be...
Certain NETGEAR devices are affected by command injection. This affects WAC510 before 1.3.0.10, WAC120 before 2.1.4, WNDAP620 before 2.1.3, WND930 before 2.1.2, WN604 before 3.3.7, WNDAP660 before 3.7.4.0, WNDAP350 be...
Commonly exposed ports
- Port 23 (Telnet) — Sends admin credentials unencrypted — a common target on older router firmware.
- Port 80 (HTTP admin panel) — The web admin UI; dangerous if remote/WAN administration is left enabled.
- Port 7547 (TR-069 (CWMP)) — ISP remote-management protocol — has been the entry point for several router botnets.
- Port 1900 (UPnP/SSDP) — Lets apps on your LAN open firewall holes automatically, sometimes without your knowledge.
Default credentials
From ProbeShield's own tested default-credential list (see probeshield.com/default-passwords/): "netgear" / "password" or "admin" / "netgear1" or "admin" / "password123" over HTTP.
Hardening checklist
- Disable remote (WAN-side) administration unless you specifically need it.
- Turn off UPnP unless a specific app you trust requires it.
- Turn off WPS — it can let an attacker bypass your Wi-Fi password.
- Change the default admin username and password to something unique.
- Check for a firmware update in the router’s admin panel and apply it.
- Disable Telnet/SSH management access if you don’t actively use it.
Frequently asked questions
Is my Netgear Wndap660 affected by these vulnerabilities? Only if you’re running a firmware version in the affected range listed above and haven’t updated. Check your router's admin panel for its current firmware version and compare it against the ranges below.
How do I update my Netgear Wndap660's firmware? Log into the router's web admin panel (usually at its local IP address) and look for a Firmware Update or System Update section, or use the vendor's mobile app if it has one.
Does ProbeShield fix these vulnerabilities for me? No — ProbeShield scans your network and tells you what it finds (open ports, default credentials, outdated firmware signals) so you know what to fix, and how. It never changes your devices’ settings.
Sources: National Vulnerability Database (NVD), CISA Known Exploited Vulnerabilities Catalog. This page lists which firmware versions are affected — it doesn't claim your specific unit is vulnerable. Check your device's current firmware version in its admin panel and compare it against the ranges above.