Netgear Jgs516pe Vulnerabilities
20 known CVEs, 1 critical, 1 in CISA's Known Exploited Vulnerabilities catalog. Last updated 2026-10-24.
Known CVEs
NETGEAR JGS516PE devices before 2.6.0.43 are affected by lack of access control at the function level.
The hashing algorithm implemented for NSDP password authentication on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was found to be insecure, allowing attackers (with access to a network capture) to quickly generate mul...
The CSRF protection mechanism implemented in the web administration panel on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices could be bypassed by omitting the CSRF token parameter in HTTP requests.
The authentication token required to execute NSDP write requests on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices is not properly invalidated and can be reused until a new token is generated, which allows attackers (wit...
The NSDP protocol implementation on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was affected by an authentication issue that allows an attacker to bypass access controls and obtain full control of the device.
Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects JGS516PE before 2.6.0.48, JGS524Ev2 before 2.6.0.48, JGS524PE before 2.6.0.48, and GS116Ev2 before 2.6.0.48. A TFTP se...
Certain NETGEAR devices are affected by lack of access control at the function level. This affects JGS516PE before 2.6.0.48, JGS524Ev2 before 2.6.0.48, JGS524PE before 2.6.0.48, and GS116Ev2 before 2.6.0.48. The TFTP ...
A buffer overflow vulnerability in the access control section on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices (in the administration web panel) allows an attacker to inject IP addresses into the whitelist via the check...
NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices allow unauthenticated users to modify the switch DHCP configuration by sending the corresponding write request command.
The NSDP protocol implementation on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was not properly validating the length of string parameters sent in write requests, potentially allowing denial of service attacks.
Commonly exposed ports
- Port 23 (Telnet) — Sends admin credentials unencrypted — a common target on older router firmware.
- Port 80 (HTTP admin panel) — The web admin UI; dangerous if remote/WAN administration is left enabled.
- Port 7547 (TR-069 (CWMP)) — ISP remote-management protocol — has been the entry point for several router botnets.
- Port 1900 (UPnP/SSDP) — Lets apps on your LAN open firewall holes automatically, sometimes without your knowledge.
Default credentials
From ProbeShield's own tested default-credential list (see probeshield.com/default-passwords/): "netgear" / "password" or "admin" / "netgear1" or "admin" / "password123" over HTTP.
Hardening checklist
- Disable remote (WAN-side) administration unless you specifically need it.
- Turn off UPnP unless a specific app you trust requires it.
- Turn off WPS — it can let an attacker bypass your Wi-Fi password.
- Change the default admin username and password to something unique.
- Check for a firmware update in the router’s admin panel and apply it.
- Disable Telnet/SSH management access if you don’t actively use it.
Frequently asked questions
Is my Netgear Jgs516pe affected by these vulnerabilities? Only if you’re running a firmware version in the affected range listed above and haven’t updated. Check your router's admin panel for its current firmware version and compare it against the ranges below.
How do I update my Netgear Jgs516pe's firmware? Log into the router's web admin panel (usually at its local IP address) and look for a Firmware Update or System Update section, or use the vendor's mobile app if it has one.
Does ProbeShield fix these vulnerabilities for me? No — ProbeShield scans your network and tells you what it finds (open ports, default credentials, outdated firmware signals) so you know what to fix, and how. It never changes your devices’ settings.
Sources: National Vulnerability Database (NVD), CISA Known Exploited Vulnerabilities Catalog. This page lists which firmware versions are affected — it doesn't claim your specific unit is vulnerable. Check your device's current firmware version in its admin panel and compare it against the ranges above.