Hikvision DS 2cd4112f I(z) Vulnerabilities
2 known CVEs, 1 critical, 1 in CISA's Known Exploited Vulnerabilities catalog. Last updated 2026-10-24.
Known CVEs
An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3....
A Password in Configuration File issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series...
Commonly exposed ports
- Port 554 (RTSP) — Streams the raw camera feed — if exposed to the internet, anyone who finds it can watch it.
- Port 8000 (Vendor device/mobile-app port) — Used by the vendor’s own mobile app to reach the camera; a frequent target for credential-stuffing.
- Port 37777 (Dahua/Hikvision proprietary port) — Vendor-specific control protocol, often enabled by default and rarely needed from the internet.
- Port 80 (HTTP admin panel) — The web admin UI; dangerous if port-forwarded to the internet.
Default credentials
No verified default-credential pair for this model in ProbeShield's own tested list — check the label on the device or its manual.
Hardening checklist
- Never port-forward the camera directly to the internet — use the vendor’s cloud app or a VPN instead.
- Change the default admin password immediately after setup.
- Disable UPnP on your router so the camera can’t punch its own hole in your firewall.
- Check for a firmware update in the vendor’s app and apply it.
- Turn off any "cloud P2P"/remote-access feature you don’t actually use.
Frequently asked questions
Is my Hikvision DS 2cd4112f I(z) affected by these vulnerabilities? Only if you’re running a firmware version in the affected range listed above and haven’t updated. Check your camera's admin panel for its current firmware version and compare it against the ranges below.
How do I update my Hikvision DS 2cd4112f I(z)'s firmware? Log into the camera's web admin panel (usually at its local IP address) and look for a Firmware Update or System Update section, or use the vendor's mobile app if it has one.
Does ProbeShield fix these vulnerabilities for me? No — ProbeShield scans your network and tells you what it finds (open ports, default credentials, outdated firmware signals) so you know what to fix, and how. It never changes your devices’ settings.
Sources: National Vulnerability Database (NVD), CISA Known Exploited Vulnerabilities Catalog. This page lists which firmware versions are affected — it doesn't claim your specific unit is vulnerable. Check your device's current firmware version in its admin panel and compare it against the ranges above.